Pyrometer world leader in precision temperature sensors, temperature measurement infrared thermometers, thermocouple thermometers and process automation equipment.

Pyrometer - PMA process machinery automation full line of programmable logic plc process control automation controller systems.

During the development of P-open, PMA combined the latest PLC technology with many years of experience, which resulted in a  flexible, scaleable, and open system for machine process control automation using a programmable logic controller. 

Via several CAN field bus levels, P-open systems are able to solve even very complex controller tasks in a transparent way. By means of the direct Ethernet link (TCP / IP protocol) P-open can be connected into existing process automation networks very easily. 

  • Standardized CAL / CANopen protocol 
  • Fast CPUs with multiple communication facilities 
  • Software runs under Windows according to IEC 1131 
  • Stand-alone, intelligent programmable logic controller modules 
  • Connection to intelligent sensors 
  • De-centralized control and sequencing, but centralized programming 
  • Compact construction 
  • Considerable savings in wiring and converters 
  • Remote controller modules relieve the IPC or PLC programmable logic controller
     
PU 100  Stand Alone PLC CPU Intelligent PLC process control module, programmable logic controller
  • Powerful 32-bit CPU (68332)
  • 1,25 MByte SRAM 
  • 2 MByte Flash program memory 
  • 2 CANbus ports: 
    • Wide CAN 
    • Local CAN 
  • RS 232 debug interface 
  • 16 digital inputs/outputs 

CPU PU 103-X  CPU module with RS232, RS422, RS485 Data interfaces
  • 32-bit µP 68332 
  • 1,25 MB SRAM 
  • 2 MB Flash 
  • Local CAN 
  • Wide CAN 
  • 4x RS (232 / 422 / 485) 
  • 4 encoders 
  • Control of 2 stepping motors 
  • Available modules / CPU

PU 104  Intelligent PLC module with CAN field bus or Ethernet bridge
  • 32-bit µP 68360 
  • 2 MB SRAM 
  • 2 MB Flash 
  • Local CAN 
  • Wide CAN 
  • Ethernet 
  • RS 232 
  • 16 digital inputs 
  • 16 digital inputs/outputs

 IO 100-C I/O   Digital extension module CAN CANopen
 IO 100-C I/O Digital extension module CAN CANopen

 IO 100-C I/O Digital extension module CAN CANopen IO 100 Datasheet (87KB)
  • 16 digital outputs 24V 0.5A
  • 16 digital inputs
  • "Bit-wise" reconfiguration of outputs to inputs possible 
  • CAN / CANopen

IO 300 / IO 301 / IO 302  I/O extension modules for analog voltages
  • 16 analog 12-bit inputs +/-10V 
  • 4 analog 12-bit outputs +/-10V 
  • 10V ref. voltage for displacement transducers 
  • Available modules / remote IO 
KS 800  Multiple Temperature Controller with 8 loops, CANbus, PROFIBUS-DP, Device-net

Following CANbus and PROFIBUS-DP , the successful KS 800 is now available in a version for Device-Net. Furthermore, the controller can now be supplied with 8 additional analog outputs. This allows analog actuators to be controlled with a 0...20mA (0...10V) signal, so that heating or cooling devices with a continuous input can be connected directly.

In addition, the function "water cooling" (evaporation principle) is included as standard.
Unused digital inputs/outputs of the controller can also be addressed directly by the central PLC system.
Via a freely configurable process data module and the Engineering Tool, data can be defined for transmission on the PROFIBUS-DP link. With CANbus and the LMT service, the KS 800-CAN can be addressed via its serial number, thus allowing individual identification e.g. of transmission speed and node address.
  • Clip-on housing for "top-hat" DIN rails 
  • 3-point or 3-point stepping control for thermocouples and Pt 100 input 
  • Start-up circuit for hot-runners 
  • Stand-by function 
  • Heating current monitor 
  • CANbus / CANopen, PROFIBUS-DP, RS 422/485 
  • Interface for PC, Engineering Tool or operating
    terminal BT 800
BT 800 Operating terminal for KS 800
"Plug & play" solution for operating up to five KS 800 modules 
LS 800 Compact power package 
8 power switches (solid-state relays 35A) 

KS 816  16-channel Transmitter and closed loop Controller, CAN, CANopen, Ethernet, Profibus-DP
  • Field-bus ports: CAN / CANopen or RS 485/422 (PROFIBUS-DP in preparation) 
  • 16 individually configurable universal inputs 
  • 0(4)...20mA, 0...+/-10V, thermocouples, Pt 100 
  • Comprehensive software functions: self-tuning; start-up circuit; gradients, etc. 
  • Controller outputs via field-bus to on/off and continuous actuators 
  • Connection of Engineering Tool or local operating unit 
  • In rail-mounted terminal housing 
DC 150  Field-bus module for fast DDC control and sequencing tasks
  • 32-bit CPU, IEC 1131-3 programmable 
  • Up to 8 Mbytes memory for archive and real-time clock 
  • 2 field-bus ports: 2x CAN / CANopen or 1x CANopen, 1x PROFIBUS-DP 
  • 1x modem interface 
  • 2x serial interfaces 
  • 8 digital inputs that can also be used as frequency inputs 
  • 8 digital inputs / outputs with individual configuration 
  • 8 analog inputs and outputs respectively 
  • In rail-mounted housing 
MC 100  Intelligent CANbus Servo-Controller 

CAN / CANopen interface 
Programmable motion trajectories 
Comfortable Windows-based Engineering Tool

MC 100-1

  • 1 brushless DC motor with Hall or resolver interface 
  • Power 300 W 

MC 100-2 

  • 2 DC motors with brushes 
  • Power 2 x 300 W 

RM 200  Modular I/O System, with field bus interfaces to CANopen, PROFIBUS-DP or MODBUS
The de-central I/O modules with field bus interfaces to CANopen, PROFIBUS-DP or MODBUS offer a high degree of flexibility to the application engineer specifying his system. The compact, cost-saving modules can be combined to a device with the optimum number of Remote I/O channels. A subsequent system extension is easily possible thanks to the modular design. The decentralized mounting acquires the signals locally and reduces the mounting and cable costs.
BUS Coupler: RM201-203 Digital Inputs: RM241-243
Analog Inputs: RM221-224 Digital Outputs: RM251-252
Analog outputs: RM231

RM 200 Modular I/O System, with fieldbus interfaces to CANopen, PROFIBUS-DP or MODBUS
  • Field bus interfaces for CANopen, PROFIBUS-DP, MODBUS
  • Modular system for Taylor made applications
  • Flexible design of application
  • Easy commissioning and operation
  • Broad range of available sensor and signal modules
  • High signal resolution
  • Clear galvanic isolation concept
  • Reduced type variety by configurable multifunction modules
  • Cost- effective module size

CP 1131  Programming environment for P-open, Ethernet TCP IP, CAN, CANopen, RS232 ( Programmable logic controller )
  • In accordance with international standard IEC 1131-3 
  • Runs on a PC under Windows 
  • Powerful languages:
    • Standard libraries 
    • USER libraries 
    • Integration of C-programs
  • Source code debugging 
  • Simulation 
  • Documentation:
    • Cross-references 
    • Tree structure 
  • Access to all CPUs from one point via: 
    • Ethernet TCP / IP 
    • CAN / CANopen 
    • RS 232 programming port of a  CPU

©2007 The Pyrometer Instrument Company, Inc. All Rights Reserved.