Please choose your language:

 

Search results

Pyrometer CellaTemp PX 29

The CellaTemp® PX 29 is equipped with a special blocking filter and sensor. As a result, the measurement is not affected by daylight or laser radiation. The CellaTemp® PX 29 also responds substantiall

Pyrometer CellaTemp PX 29

Article description

The CellaTemp® PX 29 is equipped with a special blocking filter and sensor. As a result, the measurement is not affected by daylight or laser radiation. The CellaTemp® PX 29 also responds substantially less sensitive on reflective external radiation from hot objects around than conventional devices working at short wavelengths. The combinability of the assembly groups and lenses results in 24 device variants. In combination with the supplementary lenses, very small objects from Ø 0.3 mm can be detected. Due to the large measuring ranges and the many optical variations, the CellaTemp® PX 29 can be used for a wide variety of applications in the metalworking industry. It is used among others for measuring the temperature of aluminium and bare metals at low temperatures. Due to the blocking filter, the CellaTemp® PX 29 is also suitable for measurement in processes where diode, Nd:YAG or CO₂ lasers are used for heating without the high energy of the laser influencing the measured value. This means that the pyrometer can be used in PVD (physical vapour deposition) coating processes.

Special features:
  • Measuring range 150 to 2,000 °C
  • modern IO-Link interface
  • focusable interchangeable lenses for exact adjustment of the measuring distance
  • broadband anti-reflective precision lenses
  • LED display can be read from a great distance
  • all parameters and functions adjustable via keyboard
  • test current output for the diagnostic function
  • 1 analogue output and 2 switching outputs
  • source freely configurable
  • ATD function for automatic temperature detection
This video will only be loaded from YouTube when you click on the play button. When loading, data is transmitted to YouTube, which is processed outside our sphere of influence. For more information, please refer to our privacy policy.
Features of video camera

Pyrometer CellaTemp PX 29
Properties
Version
Measuring range
150 - 800 °C
Focal distance
0,2 - 0,4 m
Through-the-lens sighting
Your selection will impact other settings.
You can request this article from us
More information about IO-Link:

Version CellaTemp PX 29 AF 10 
Version CellaTemp PX 29 AF 1 
Version CellaTemp PX 29 AF 2 
Version CellaTemp PX 29 AF 3 
Version CellaTemp PX 29 AF 4 
Version CellaTemp PX 29 AF 21 
Version CellaTemp PX 29 AF 22 
Version CellaTemp PX 29 AF 23 
Measuring range 150 - 800 °C 
Measuring range 250 - 2000 °C 
Measuring range 180 - 1200 °C 
Focal distance 0,3 m - ∞ 
Focal distance 0,4 m - ∞ 
Focal distance 0,2 - 0,4 m 
Focal distance 1,2 m - ∞ 
Focal distance 0,2 m - ∞ 
Shape of the measuring field round 
Distance ratio 48 : 1 
Distance ratio 210 : 1 
Distance ratio 200 : 1 
Distance ratio 310 : 1 
Distance ratio 55 : 1 
Distance ratio 60 : 1 
Distance ratio 56 : 1 
Distance ratio 96 : 1 
Objective PZ 20.08 
Objective PZ 20.01 
Objective PZ 20.03 
Objective PZ 20.06 
Objective PZ 20.05 
Measuring principle one-color 
Sighting device Through-the-lens sighting 
Sighting device Laser pilot light 
Sighting device Video camera 

Technical Data Downloads Measurement field calculator Accessories Emissivity calculator Application request IO-Link IODD IO-Link Manufacturer declaration

Pyrometer CellaTemp PX 29

Technical Data

Measurement parameters

Measuring range 150 - 2,000 °C in sub-ranges
Sensor Photodiode
Spectral range 1.8 - 2.2 µm
Response time t98 Measuring range 150 - 800 °C:
≤ 50 ms (T > 150 °C)
≤ 15 ms (T > 200 °C)
≤ 2 ms (T > 350 °C)

Measuring range 180 - 1,200 °C:
≤ 75 ms (T > 180 °C)
≤ 35 ms (T > 200 °C)
≤ 5 ms (T > 300 °C)
≤ 2 ms (T > 600 °C)

Measuring range 250 - 2,000 °C:
≤ 50 ms (T > 250 °C)
≤ 2 ms (T > 750 °C)
Measurement uncertainty Measuring range 150 - 800 °C and 180 - 1,200 °C:
0.75 % of temp. reading [°C] min. 5 K

Measuring range 250 - 2,000 °C:
0.5 % of temp. reading [°C] min. 4 K
Repeatability 1 K
Temperature coefficient 0.25 K/K (T < 500 °C)
0.05 %/K (T > 500 °C)
Resolution current output 0.2 K + 0.03 % of selected measuring span
Resolution interface 0.1 K
Resolution display Measuring range 150 - 800 °C and 180 - 1,200 °C:
0.1 K < 200 °C
1 K ≥ 200 °C

Measuring range 250 - 2,000 °C:
1 K

Optical variants

Objective lenses Measuring range 150 - 800 °C:
Objektiv F50 PZ 20.08: Fokussierung 0,3 m - ∞

Measuring range 180 - 1,200 °C:
Standard objective lens PZ 20.01: focusing 0.4 m - ∞
Close-up lens PZ 20.03: focusing 0.2 m - 0.4 m
Telephoto lens PZ 20.06: focusing 1.2 m - ∞

Measuring range 250 - 2,000 °C:
Standard objective lens PZ 20.01: focusing 0.4 m - ∞
Close-up lens PZ 20.03: focusing 0.2 m - 0.4 m
Wide-angle lens PZ 20.05: focusing 0.2 m - ∞
Telephoto lens PZ 20.06: focusing 1.2 m - ∞

Electrical parameters

Analog output 0(4) - 20 mA linear, switchable, scalable
Resistance ≤ 500 Ω
Switching output 2 x Open Collector 24 V DC, ≤ 150 mA
Interface IO-Link
Power supply 24 V DC +10 % / -20 %
Current consumption ≤ 175 mA at 24 V DC

Video camera

Video output Composite PAL, 1 Vpp, 75 Ω

Equipment

Sighting device Through-the-lens-sighting
Sighting device Laser pilot light
Sighting device Video camera
Display 4 x 7 segments LED red, digit height 8 mm
Status display 4 x LED
Operator controls 3 pushbuttons

General parameters

Connection M12 screw connection 5-pin
Ambient temperature 0 - 65 °C
Storage temperature -20 - +80 °C
Permissible air humidity 95 % RH max. (non-condensing)
Dimension Ø 65 mm x 220 mm (max. 277 mm)
Housing material Stainless steel V2A (1.4305)
Type of protection IP 65 acc. to DIN 40050
Weight approx. 0.9 kg

Adjustable parameters

Parameters Analog output 0/4 - 20 mA
Scaling of the analogue output
Smoothing filter
Memory operation mode
Holding time of the memory
Emissivity
Transmittance
Limit values and operating mode of the alarm contacts
Parameters of the ATD function
Simulation of current and temperature
Temperature unit °C/°F

additionally for pyrometer with camera:
TBC funktion
White balance
Measuring point number

Functions

Overtemperature signal Signal display at an internal temperature > 75 °C
Service function Simulation of a measured value or a current signal
ATD (Automatic Temperature Detection) function Automatic temperature detection at discontinuous processes

Scope of delivery

Scope of delivery Pyrometer CellaTemp PX
Connection cable VK 02/L AF 1 (5 m)
Video cable VK 02/F (5 m) for model with built-in camera
Operating manual (short)

Software

Software SW 50

Pyrometer CellaTemp PX 29

Emissivity calculator

The correct emissivity to be set on the pyrometer is calculated from the measured value displayed on the pyrometer, the true object temperature, the emissivity preset at the pyrometer and the ambient temperature (required for some instrument types).
The value displayed by the pyrometer is calculated from the true object temperature, the emissivity of the measurement object, the emissivity set on the pyrometer and the ambient temperature (required for some instrument types).
Pyrometer
Quotient
  • Two-color mode
  • One-color 1
  • One-color 2
Preset emissivity
Emissivity ratio to be set
Ambient temperature
Object temperature
Value measured by the pyrometer
Pyrometer
Quotient
  • Two-color mode
  • One-color 1
  • One-color 2
Preset emissivity
Value measured by the pyrometer
Ambient temperature
Object temperature
Emissivity ratio to be set

Pyrometer CellaTemp PX 29

Downloads

Brochure CellaTemp PX
us
Brochure Flyer IO-Link
us
Brochure Supplementary lenses
us
Manual CellaTemp PX 1x 2x 3x
us
Quick guide CellaTemp PX 1x 2x 3x
us
Declaration of conformity Declaration from Conformity PXxx
us
UKCA Declaration from Conformity PXxx
us
EAC Deklaration PX
us

Pyrometer CellaTemp PX 29

Accessories

Pyrometer CellaTemp PX 29

IO-Link IODD

Type Datei Dateigröße
IODD PX29AF10-C_20190415.zip 1736 KB Download
IODD PX29AF21-22-23_20190418.zip 1730 KB Download
IODD PX29AF10-L_20190503.zip 1739 KB Download
IODD PX29AF1-2-3-4_20190329.zip 1732 KB Download
IODD PX29AF10_20190415.zip 1729 KB Download
IODD PX29AF1-2-3-4-C_20190329.zip 1739 KB Download
IODD PX29AF1-2-3-4-L_20190503.zip 1740 KB Download
IODD PX29AF21-22-23-L_20190503.zip 1745 KB Download
IODD PX29AF21-22-23-C_20190418.zip 1737 KB Download

Pyrometer CellaTemp PX 29

IO-Link Manufacturer declaration

Type Datei Dateigröße
MC PX 29 AF 10_20190415_en.pdf 353 KB Download
MC PX 29 AF 21 22 23_20190423_en.pdf 361 KB Download
MC PX 29 AF 1 2 3 4 L_20190401_en.pdf 360 KB Download
MC PX 29 AF 21 22 23 C_20190423_en.pdf 359 KB Download
MC PX 29 AF 1 2 3 4 C_20190329_en.pdf 362 KB Download
MC PX 29 AF 10 C_20190415_en.pdf 352 KB Download
MC PX 29 AF 1 2 3 4_20190329_en.pdf 360 KB Download
MC PX 29 AF 10 L_20190416_en.pdf 354 KB Download
MC PX 29 AF 21 22 23 L_20190423_en.pdf 359 KB Download

Pyrometer CellaTemp PX 29

Measurement field calculator

Pyrometer
  • PX 29 AF 1 (0,4 m - ∞)
  • PX 29 AF 10 (0,3 m - ∞)
  • PX 29 AF 2 (0,2 - 0,4 m)
  • PX 29 AF 21 (0,4 m - ∞)
  • PX 29 AF 22 (0,2 - 0,4 m)
  • PX 29 AF 23 (1,2 m - ∞)
  • PX 29 AF 3 (1,2 m - ∞)
  • PX 29 AF 4 (0,2 m - ∞)
PX 29 AF 1 (0,4 m - ∞)
Supplementary lens
  • none
  • PZ 20/0-50 (0,036 - 0,041 m)
  • PZ 20/O-63 (0,045 - 0,054 m)
  • PZ 20/O-75 (0,052 - 0,063 m)
  • PZ 20/O-120 (0,084 - 0,112 m)
none
Focal distance
mm
Length of the graph
mm
Measuring distance (mm)03264961281601922242562883203523841.90 mm
Measuring distanceMeasuring field diameter
0.00 mm18.50 mm
16.00 mm17.84 mm
32.00 mm17.17 mm
48.00 mm16.51 mm
64.00 mm15.84 mm
80.00 mm15.18 mm
96.00 mm14.52 mm
112.00 mm13.85 mm
128.00 mm13.19 mm
144.00 mm12.53 mm
160.00 mm11.86 mm
176.00 mm11.20 mm
192.00 mm10.53 mm
208.00 mm9.87 mm
224.00 mm9.21 mm
240.00 mm8.54 mm
256.00 mm7.88 mm
272.00 mm7.22 mm
288.00 mm6.55 mm
304.00 mm5.89 mm
320.00 mm5.22 mm
336.00 mm4.56 mm
352.00 mm3.90 mm
368.00 mm3.23 mm
384.00 mm2.57 mm
400.00 mm1.90 mm