Start page
 

Suchergebnisse

Pyrometer CellaCombustion PX 47

Article description

The CellaCombustion PX 47 is a special pyrometer for non-contact temperature measurement of sooty flames in coal-fired power stations and incineration plants. The measurement and signal processing, both based on the two-colour method, detect the heat radiation of the soot emitting particles of the flame in the near infrared range at two wavelengths. In order to correct the influence of the wavelength-dependent radiation properties of the soot particles and the optical density of flames, a special algorithm is used during the temperature determination. The flame temperature can be used to control the burnout in the furnace operation in order to reduce pollutant emissions and minimize slagging of the combustion chamber walls.

Special features:
  • Measuring range 700 to 1
  • 700 °C -- modern IO-Link interface -- focusable lenses for exact adjustment of the measuring distance -- broadband anti-reflective precision lens -- LED display can be read from a great distance -- test current output for the diagnostic function -- 1 analogue output and 2 switching outputs -- source freely configurable
Pyrometer CellaCombustion PX 47
Properties
Version
Measuring range
700 - 1700 °C
Focal range
0,4 m - ∞
Through-the-lens sighting
Your selection will impact other settings.
You can request this article from us
More information about IO-Link:

Version CellaCombustion PX 47 AF 1 
Measuring range 700 - 1700 °C 
Focal range 0,4 m - ∞ 
Shape of the measuring field round 
Distance ratio 80 : 1 
Objective PZ 20.01 
Measuring principle two-color 
Sighting option Through-the-lens sighting 
Sighting option Video camera 

Technical Data Downloads Measurement field calculator Accessories Emissivity calculator Application request IO-Link IODD IO-Link Manufacturer declaration

Pyrometer CellaCombustion PX 47

Technical Data

Measurement parameters

Measuring range 700 - 1700 °C
Sensor Double photodiode
Spectral range 0,8 / 1,05 µm
Response time t98 ≤ 20 ms (T>650 °C)
≤ 10 ms (T>750 °C)
Measurement uncertainty 1 % of temp. reading [°C]
Repeatability 2 K
Temperature coefficient 0.05 %/K
Resolution current output 0.2 K + 0.03 % of selected measuring span
Resolution interface 0.1 K
Resolution display 1 K

Electrical parameters

Analog output 0(4) - 20 mA linear, switchable, scalable
Resistance ≤ 500 Ω
Switching output 2 x Open Collector 24 V DC, ≤ 150 mA
Interface IO-Link
Power supply 24 V DC +10 % / -20 %
Current consumption ≤ 175 mA at 24 V DC

video camera

Video output Composite PAL, 1 Vpp, 75 Ω

Equipment

Sighting option through-the-lens sighting
Sighting option Laser pilot light
Sighting option video camera
Display 4 x 7 segments LED red, digit height 8 mm
Status display 4 x LED
Operator controls 3 pushbuttons

General parameters

Connection M12 screw connection 5-pin
Ambient temperature 0 - 65 °C
Storage temperature -20 - +80 °C
Permissible air humidity 95 % RH max. (non-condensing)
Dimension Ø 65 mm x 220 mm (max. 277 mm)
Housing material Stainless steel V2A (1.4305)
Type of protection IP 65 acc. to DIN 40050
Weight approx. 0.9 kg

Adjustable parameters

Parameters Analog output 0/4 - 20 mA
Scaling of the analogue output
Smoothing filter
Memory operation mode
Holding time of the memory
Emissivity
Transmittance
Limit values and operating mode of the alarm contacts
Parameters of the ATD function
Simulation of current and temperature
Temperature unit °C/°F
Measuring channel two-colour, one-colour 1 and one-colour 2
Threshold value of the contamination monitoring
Soot factor

additionally for pyrometer with camera:
TBC funktion
White balance
Measuring point number

Functions

Overtemperature signal Signal display at an internal temperature > 75 °C
Service function Simulation of a measured value or a current signal
ATD (Automatic Temperature Detection) function Automatic temperature detection at discontinuous processes

Scope of delivery

Scope of delivery Pyrometer CellaTemp PX
Connection cable VK 02/L AF 1 (5 m)
Video cable VK 02/F (5 m) for model with built-in camera
Operating manual (short)

Pyrometer CellaCombustion PX 47

Emissivity calculator

The correct emissivity to be set on the pyrometer is calculated from the measured value displayed on the pyrometer, the true object temperature, the emissivity preset at the pyrometer and the ambient temperature (required for some instrument types).
The value displayed by the pyrometer is calculated from the true object temperature, the emissivity of the measurement object, the emissivity set on the pyrometer and the ambient temperature (required for some instrument types).
Pyrometer
Quotient
  • Two-color mode
  • One-color 1
  • One-color 2
Preset emissivity
Emissivity ratio to be set
Ambient temperature
Object temperature
Value measured by the pyrometer
Pyrometer
Quotient
  • Two-color mode
  • One-color 1
  • One-color 2
Preset emissivity
Value measured by the pyrometer
Ambient temperature
Object temperature
Emissivity ratio to be set

Pyrometer CellaCombustion PX 47

Downloads

Brochure CellaTemp PX
us
Brochure Flyer IO-Link
us
Manual CellaTemp PX 4x 5x 6x
us
Quick guide CellaTemp PX 4x 5x 6x
us
Declaration of conformity Declaration of Conformity PXxx
us
UKCA Declaration of Conformity PXxx
us
EAC Deklaration PX
us

Pyrometer CellaCombustion PX 47

Accessories

Pyrometer CellaCombustion PX 47

IO-Link IODD

Type Datei Dateigröße
IODD PX47AF1-L_20240814.zip 482 KB Download
IODD PX47AF1-C_20240806.zip 486 KB Download
IODD PX47AF1_20240806.zip 493 KB Download

Pyrometer CellaCombustion PX 47

IO-Link Manufacturer declaration

Pyrometer CellaCombustion PX 47

Measurement field calculator

Pyrometer
  • PX 47 AF 1 (0,4 m - ∞)
PX 47 AF 1 (0,4 m - ∞)
Focal range
mm
Length of the graph
mm
Measuring distance (mm)03264961281601922242562883203523845.00 mm
Measuring distanceMeasuring field diameter
0.00 mm18.50 mm
16.00 mm17.96 mm
32.00 mm17.42 mm
48.00 mm16.88 mm
64.00 mm16.34 mm
80.00 mm15.80 mm
96.00 mm15.26 mm
112.00 mm14.72 mm
128.00 mm14.18 mm
144.00 mm13.64 mm
160.00 mm13.10 mm
176.00 mm12.56 mm
192.00 mm12.02 mm
208.00 mm11.48 mm
224.00 mm10.94 mm
240.00 mm10.40 mm
256.00 mm9.86 mm
272.00 mm9.32 mm
288.00 mm8.78 mm
304.00 mm8.24 mm
320.00 mm7.70 mm
336.00 mm7.16 mm
352.00 mm6.62 mm
368.00 mm6.08 mm
384.00 mm5.54 mm
400.00 mm5.00 mm
Pyrometer LLC – Pyrometer Instrument Company

Attn: Service Department
70 Weber Avenue
Ewing, NJ 08638 USA
Telephone: 609-443-5522

Warranty Information | Privacy Policy | Shipping & Returns
 

Request a quote

 
       
back Checkout

Reference number:
INDICE 6 Login
© 2001-2024 – Internetagentur – Wrocklage Werbewerkstatt