Start page
 

Suchergebnisse

Pyrometer CellaTemp PK 42

Article description

In the range between 4.6 ,4.9 µm, glass has an emissivity of almost 100 %. Above 5 µm, atmospheric influences such as humidity or water vapour affect the measurement. The CellaTemp® PK 42 has a blocking filter with a spectral sensitivity of 4.6 ,4.9 µm. It thus detects the temperature from the area near the surface of the glass. Thickness changes, different types of glass or humidity changes in the atmosphere do not affect the measured value at this wavelength.

Special features:
  • Measuring range 500 to 2
  • 500 °C -- switching output universally configurable -- high optical resolution due to precision lenses -- IO-Link interface -- all parameters can be set via pushbutton on the sensor or via interface from the plant control system -- test function can be triggered by pushbutton or control signal
  • very simple mounting via M30 central thread -- large and bright LED display
Pyrometer CellaTemp PK 42
Properties
Version
Measuring range
500 - 2500 °C
Focal range
0,4 m
Your selection will impact other settings.
You can request this article from us
More information about IO-Link:

Version CellaTemp PK 42 AF 1 
Measuring range 500 - 2500 °C 
Measuring field 7 mm 
Focal range 0,4 m 
Shape of the measuring field round 
Measuring principle one-color 

Technical Data Downloads Measurement field calculator Accessories Emissivity calculator Application request IO-Link IODD IO-Link Manufacturer declaration

Pyrometer CellaTemp PK 42

Technical Data

Measurement parameters

Measuring range 500 - 2500 °C
Sensor Thermopile
Spectral range 4.6 - 4.9 µm
Response time t90 ≤ 60 ms
Measurement uncertainty 1 % of temp. reading [°C]
Repeatability 4 K
Temperature coefficient 0.04 %/K
Resolution current output 0.2 K + 0.03 % of selected measuring span
Resolution interface 0.1 K
Resolution display 1 K

Electrical parameters

Analog output 0(4) - 20 mA linear, switchable, scalable
Resistance ≤ 500 Ω
Switching output Open Collector 24 V DC, ≤ 150 mA
Test input 10 - 34 V DC (acc. to IEC 61131-2)
Interface IO-Link
Power supply 24 V DC +10 % / -20 %
Current consumption ≤ 50 mA at 24 V DC

Equipment

Display 4 x 7 segments LED red, digit height 8 mm
Status display 2 x LED
Operator controls 3 pushbuttons

General parameters

Connection M12 screw connection 5-pin (A coded)
Ambient temperature 0 - 65 °C
Storage temperature -20 - +80 °C
Permissible air humidity 95 % RH max. (non-condensing)
Dimension Ø 30 x 210 mm (without plug)
Housing material Stainless steel V2A (1.4305)
Type of protection IP 65 acc. to DIN 40050
Weight approx. 0.4 kg

Adjustable parameters

Parameters Analog output 0/4 - 20 mA
Scaling of the analogue output
Quick emissivity setting via temperature display
Damping time constant
Holding time of the peak picker
Operating mode and switching points of the switching contact
Reset to factory setting
Key lock
Temperature display
Temperature unit °C/°F
Simulation of temperature
Test function

Functions

Overtemperature signal Signal display at an internal temperature > 75 °C
Test function via pushbutton or test input
Service function Simulation of a measured value
Diagnostic function Reverse polarity, overload and incorrect supply voltage indication
Reverse polarity protection for power supply, analogue output and switching output

Scope of delivery

Scope of delivery Infrared thermometer CellaTemp PK
Operating manual (short)
2 fastening nuts

Pyrometer CellaTemp PK 42

Emissivity calculator

The correct emissivity to be set on the pyrometer is calculated from the measured value displayed on the pyrometer, the true object temperature, the emissivity preset at the pyrometer and the ambient temperature (required for some instrument types).
The value displayed by the pyrometer is calculated from the true object temperature, the emissivity of the measurement object, the emissivity set on the pyrometer and the ambient temperature (required for some instrument types).
Pyrometer
Quotient
  • Two-color mode
  • One-color 1
  • One-color 2
Preset emissivity
Emissivity ratio to be set
Ambient temperature
Object temperature
Value measured by the pyrometer
Pyrometer
Quotient
  • Two-color mode
  • One-color 1
  • One-color 2
Preset emissivity
Value measured by the pyrometer
Ambient temperature
Object temperature
Emissivity ratio to be set

Pyrometer CellaTemp PK 42

Downloads

Brochure CellaTemp PK PKF PKL
us
Brochure Flyer IO-Link
us
Manual CellaTemp PKx IO-Link
us
Quick guide CellaTemp PKxx IO-Link
us
Declaration of conformity Declaration of Conformity PKxy
us
UKCA Declaration of Conformity PKxy
us
EAC Deklaration PK-PA-PT
us

Pyrometer CellaTemp PK 42

Accessories

Pyrometer CellaTemp PK 42

IO-Link IODD

Type Datei Dateigröße
IODD PK42AF1_20221222.zip 377 KB Download

Pyrometer CellaTemp PK 42

IO-Link Manufacturer declaration

Type Datei Dateigröße
MC PK 42 AF 1_202302_en.pdf 99 KB Download

Pyrometer CellaTemp PK 42

Measurement field calculator

Pyrometer
  • PK 42 AF 1 (0,4 m)
PK 42 AF 1 (0,4 m)
Length of the graph
mm
Measuring distance (mm)03264961281601922242562883203523847.00 mm
Measuring distanceMeasuring field diameter
0.00 mm18.20 mm
16.00 mm17.75 mm
32.00 mm17.30 mm
48.00 mm16.86 mm
64.00 mm16.41 mm
80.00 mm15.96 mm
96.00 mm15.51 mm
112.00 mm15.06 mm
128.00 mm14.62 mm
144.00 mm14.17 mm
160.00 mm13.72 mm
176.00 mm13.27 mm
192.00 mm12.82 mm
208.00 mm12.38 mm
224.00 mm11.93 mm
240.00 mm11.48 mm
256.00 mm11.03 mm
272.00 mm10.58 mm
288.00 mm10.14 mm
304.00 mm9.69 mm
320.00 mm9.24 mm
336.00 mm8.79 mm
352.00 mm8.34 mm
368.00 mm7.90 mm
384.00 mm7.45 mm
400.00 mm7.00 mm
Pyrometer LLC – Pyrometer Instrument Company

Attn: Service Department
70 Weber Avenue
Ewing, NJ 08638 USA
Telephone: 609-443-5522

Warranty Information | Privacy Policy | Shipping & Returns
 

Request a quote

 
       
back Checkout

Reference number:
INDICE 6 Login
© 2001-2024 – Internetagentur – Wrocklage Werbewerkstatt