Start page
 

Search results

Pyrometer CellaTemp PKF 36

Article description

The CellaTemp® PKF 36 has separate electronics and measuring head. The infrared radiation is transmitted to the electronics via a fibre optic cable. The measuring head can be used without cooling in ambient temperatures up to 250 °C. This version can also be used in cramped mounting conditions or high electromagnetic fields. The length of the fibre optic cable can be up to 50 m. The new generation of the CellaTemp® PK pyrometer series is equipped with a smart function, the vitality indicator.
This is a self-monitoring, analysis and reporting technology (SMART), i.e. a function for self-monitoring, analysis and status reporting. The vitality monitor continuously records all relevant operating data. As part of preventive maintenance, this enables the pyrometer to autonomously signal the optimum time for a service check and calibration, depending on the operating conditions.

Special features:
  • Measuring range 550 to 2
  • 500 °C -- fibre optic cable version up to 50 m length possible -- switching output universally configurable -- high optical resolution due to precision lenses
  • IO-Link interface -- all parameters can be set via pushbutton on the sensor or via interface from the plant control system -- 2 x switching outputs PNP open collector -- very simple mounting via M30 central thread -- large and bright LED display
Pyrometer CellaTemp PKF 36
Properties
Version
Measuring range
550 - 2500 °C
Focal range
0,033 - 0,045 m
Laser pilot light
Your selection will impact other settings.
You can request this article from us

Version CellaTemp PKF 36 BF 1 
Version CellaTemp PKF 36 BF 2 
Version CellaTemp PKF 36 BF 3 
Version CellaTemp PKF 36 BF 4 
Measuring range 550 - 2500 °C 
Measuring range 550 - 2500 °C 
Measuring range 550 - 2500 °C 
Measuring range 550 - 2500 °C 
Measuring field 6,9 mm 
Focal range 0,2 m - ∞ 
Focal range 1,08 m 
Focal range 0,12 m - ∞ 
Focal range 0,033 - 0,045 m 
Shape of the measuring field round 
Distance ratio 190 : 1 
Distance ratio 100 : 1 
Distance ratio 50 : 1 
Measuring head PA 41.01 
Measuring head PKS 21.01 
Measuring head PA 41.05 
Measuring head PZ 41.18 
Measuring principle one-color 
Sighting option Laser pilot light 

Technical Data Downloads Measurement field calculator Accessories Emissivity calculator Application request IO-Link IODD IO-Link Manufacturer declaration

Pyrometer CellaTemp PKF 36

Technical Data

Measurement parameters

Measuring range 550 - 2500 °C
Sensor Photodiode
Spectral range 0,78 - 1,06 µm
Response time t90 ≤ 2 ms (T > 900 °C)
Measurement uncertainty 0.3 % of temp. reading [°C] plus 2.5 K
Repeatability 2 K
Temperature coefficient 0.07 %/K
Resolution current output 0.1 K + 0.005 % of selected measuring span
Resolution interface 0.1 K
Resolution display 1 K

Optical variants

Measuring heads AF 1: PA 41.01 (M30): focusing 0.2 m - ∞
AF 2: PKS 21.01 (M30): focusing 1.08 m
AF 3: PA 41.05 (M16): focusing 0.12 m - ∞
AF 4: PZ 41.18 (M16): focusing 0.033 - 0.045 m

Electrical parameters

Analog output 0(4) - 20 mA linear, switchable, scalable
Resistance ≤ 500 Ω
Switching output 2 x PNP Open Collector 24 V DC, 2 x 150 mA max.
Test input 10 - 34 V DC (acc. to IEC 61131-2)
Interface IO-Link V1.1.3
Power supply 18 - 32 V DC
Current consumption ≤ 50 mA at 24 V DC

Equipment

Display 4 x 7 segments LED red, digit height 8 mm
Status display 3 x LED
Operator controls 3 pushbuttons

General parameters

Connection M12 screw connection 5-pin (A coded)
Ambient temperature 0 - 65 °C
Storage temperature -20 - +80 °C
Permissible air humidity 95 % RH max. (non-condensing)
Dimension Ø 30 x 210 mm (without plug)
Housing material Stainless steel V2A (1.4305)
Type of protection IP 65 acc. to DIN 40050
Weight approx. 0.4 kg

Adjustable parameters

Parameters Analog output 0/4 - 20 mA
Scaling of the analogue output
Emissivity via quick adjustment
Transmission level of the protective glass
Damping time constant
Holding time of the peak picker
Operating mode, source and switching point, switch-on and switch-off delay of the switching contacts
Temperature correction for process-specific influences by means of interpolation points (X/Y pairs)
Vitality indicator
Service parameter
Reset to factory setting
Key lock
Display of the temperature or “run” in the display
Temperature unit °C/°F
Simulation of temperature

Functions

Overtemperature signal Signal display at an internal temperature > 75 °C
Test function via pushbutton or test input
Service function Simulation of a measured value
Diagnostic function Reverse polarity, overload and incorrect supply voltage indication
Reverse polarity protection M12 screw connection 5-pin (A coded)

Scope of delivery

Scope of delivery Infrared thermometer CellaTemp PKF
Measuring head
Operating manual (short)
2 fastening nuts
* The fibre optic cable must be ordered separately.

Pyrometer CellaTemp PKF 36

Emissivity calculator

The correct emissivity to be set on the pyrometer is calculated from the measured value displayed on the pyrometer, the true object temperature, the emissivity preset at the pyrometer and the ambient temperature (required for some instrument types).
The value displayed by the pyrometer is calculated from the true object temperature, the emissivity of the measurement object, the emissivity set on the pyrometer and the ambient temperature (required for some instrument types).
Pyrometer
Quotient
  • Two-color mode
  • One-color 1
  • One-color 2
Preset emissivity
Emissivity ratio to be set
Ambient temperature
Object temperature
Value measured by the pyrometer
Pyrometer
Quotient
  • Two-color mode
  • One-color 1
  • One-color 2
Preset emissivity
Value measured by the pyrometer
Ambient temperature
Object temperature
Emissivity ratio to be set

Pyrometer CellaTemp PKF 36

Downloads

Brochure CellaTemp PK PKF PKL
us
Brochure Flyer IO-Link
us
Manual CellaTemp PKx IO-Link
us
Quick guide CellaTemp PKxx IO-Link
us
Drawing PK 01 E AF2
us
Declaration of conformity Declaration of Conformity PKxy
us
UKCA Declaration of Conformity PKxy
us
EAC Deklaration PK-PA-PT
us

Pyrometer CellaTemp PKF 36

Accessories

Pyrometer CellaTemp PKF 36

IO-Link IODD

Type Datei Dateigröße
IODD PKF36AF2_20221222.zip 403 KB Download
IODD PKF36AF3_20221222.zip 400 KB Download
IODD PKF36AF4_20221222.zip 400 KB Download
IODD PKF36AF1_20221222.zip 394 KB Download

Pyrometer CellaTemp PKF 36

IO-Link Manufacturer declaration

Type Datei Dateigröße
MC PKF 36 AF 3_202302_en.pdf 100 KB Download
MC PKF 36 AF 1_202302_en.pdf 100 KB Download
MC PKF 36 AF 4_202302_en.pdf 100 KB Download
MC PKF 36 AF 2_202302_en.pdf 100 KB Download

Pyrometer CellaTemp PKF 36

Measurement field calculator

Pyrometer
  • PKF 36 AF 1 (0,2 m - ∞)
  • PKF 36 AF 2 (1,08 m)
  • PKF 36 AF 3 (0,12 m - ∞)
  • PKF 36 AF 4 (0,033 - 0,045 m)
PKF 36 AF 1 (0,2 m - ∞)
Focal range
mm
Length of the graph
mm
Measuring distance (mm)0816243240485664728088961041121201281361441521601681761841922001.05 mm
Measuring distanceMeasuring field diameter
0.00 mm23.40 mm
8.00 mm22.51 mm
16.00 mm21.61 mm
24.00 mm20.72 mm
32.00 mm19.82 mm
40.00 mm18.93 mm
48.00 mm18.04 mm
56.00 mm17.14 mm
64.00 mm16.25 mm
72.00 mm15.35 mm
80.00 mm14.46 mm
88.00 mm13.57 mm
96.00 mm12.67 mm
104.00 mm11.78 mm
112.00 mm10.89 mm
120.00 mm9.99 mm
128.00 mm9.10 mm
136.00 mm8.20 mm
144.00 mm7.31 mm
152.00 mm6.42 mm
160.00 mm5.52 mm
168.00 mm4.63 mm
176.00 mm3.73 mm
184.00 mm2.84 mm
192.00 mm1.95 mm
200.00 mm1.05 mm
Pyrometer LLC – Pyrometer Instrument Company

Attn: Service Department
70 Weber Avenue
Ewing, NJ 08638 USA
Telephone: 609-443-5522

Warranty Information | Privacy Policy | Shipping & Returns
 

Request a quote

 
       
back Checkout

Reference number:
INDICE 6 Login
© 2001-2025 – Internetagentur – Wrocklage Werbewerkstatt