Start page
 

Suchergebnisse

Pyrometer CellaTemp PX 35

Article description

The CellaTemp® PX 35 has a very short-wave and narrow-band spectral sensitivity. Therefore, the pyrometer reacts to interfering influences such as signal weakening by dust, vapour or smoke in the pyrometer's field of view, to soiling of the protective window or to emissivity fluctuations of the measuring object much less than a conventional spectral pyrometer. Metals have the physical property that the emissivity increases with shorter radiation wavelengths and higher object temperatures. Therefore, the CellaTemp® PX 35 is ideal for precise measurement of metals and very hot objects. In addition, the pyrometer is used to measure thin semiconductors, as semiconductors have very good radiation properties in the pyrometer's special spectral range. For wavelengths > 1 µm, silicon is transparent, so a standard pyrometer would measure the temperature of the material behind it through the silicon.

Special features:
Pyrometer CellaTemp PX 35
Properties
Version
Measuring range
600 - 3000 °C
Focal range
0,2 - 0,4 m
Through-the-lens sighting
Your selection will impact other settings.
You can request this article from us
More information about IO-Link:

Version CellaTemp PX 35 AF 1 
Version CellaTemp PX 35 AF 2 
Version CellaTemp PX 35 AF 3 
Version CellaTemp PX 35 AF 4 
Version CellaTemp PX 35 AF 5 
Measuring range 600 - 3000 °C 
Measuring range 600 - 3000 °C 
Measuring range 600 - 3000 °C 
Measuring range 600 - 3000 °C 
Measuring range 600 - 3000 °C 
Focal range 0,4 m - ∞ 
Focal range 0,2 - 0,4 m 
Focal range 1,2 m - ∞ 
Focal range 0,2 m - ∞ 
Focal range 0,6 m - ∞ 
Shape of the measuring field round 
Distance ratio 210 : 1 
Distance ratio 200 : 1 
Distance ratio 310 : 1 
Distance ratio 55 : 1 
Distance ratio 430 : 1 
Objective PZ 20.01 
Objective PZ 20.03 
Objective PZ 20.06 
Objective PZ 20.05 
Objective PA 20.06 
Measuring principle one-color 
Sighting option Through-the-lens sighting 
Sighting option Laser pilot light 
Sighting option Video camera 

Technical Data Downloads Measurement field calculator Accessories Emissivity calculator Application request IO-Link IODD IO-Link Manufacturer declaration

Pyrometer CellaTemp PX 35

Technical Data

Measurement parameters

Measuring range 600 - 3000 °C
Sensor Photodiode
Spectral range 0.82 - 0.93 µm
Response time t98 ≤ 50 ms (T > 650 °C)
≤ 2 ms (T > 850 °C)
Measurement uncertainty 0.3 % of temp. reading [°C] min. 4 K
Repeatability 1 K
Temperature coefficient 0.05 %/K
Resolution current output 0.2 K + 0.03 % of selected measuring span
Resolution interface 0.1 K
Resolution display 1 K

Optical variants

Objective lenses Standard objective lens PZ 20.01: focusing 0.4 m - ∞
Close-up lens PZ 20.03: focusing 0.2 m - 0.4 m
Wide-angle lens PZ 20.05: focusing 0.2 m - ∞
Telephoto lens I PZ 20.06: focusing 1.2 m - ∞
Telephoto lens II PA 20.06: focusing 0.6 m - ∞

Electrical parameters

Analog output 0(4) - 20 mA linear, switchable, scalable
Resistance ≤ 500 Ω
Switching output 2 x Open Collector 24 V DC, ≤ 150 mA
Interface IO-Link
Power supply 24 V DC +10 % / -20 %
Current consumption ≤ 175 mA at 24 V DC

video camera

Video output Composite PAL, 1 Vpp, 75 Ω

Equipment

Sighting option through-the-lens sighting
Sighting option Laser pilot light
Sighting option video camera
Display 4 x 7 segments LED red, digit height 8 mm
Status display 4 x LED
Operator controls 3 pushbuttons

General parameters

Connection M12 screw connection 5-pin
Ambient temperature 0 - 65 °C
Storage temperature -20 - +80 °C
Permissible air humidity 95 % RH max. (non-condensing)
Dimension Ø 65 mm x 220 mm (max. 277 mm)
Housing material Stainless steel V2A (1.4305)
Type of protection IP 65 acc. to DIN 40050
Weight approx. 0.9 kg

Adjustable parameters

Parameters Analog output 0/4 - 20 mA
Scaling of the analogue output
Smoothing filter
Memory operation mode
Holding time of the memory
Emissivity
Transmittance
Limit values and operating mode of the alarm contacts
Parameters of the ATD function
Simulation of current and temperature
Temperature unit °C/°F

additionally for pyrometer with camera:
TBC funktion
White balance
Measuring point number

Functions

Overtemperature signal Signal display at an internal temperature > 75 °C
Service function Simulation of a measured value or a current signal
ATD (Automatic Temperature Detection) function Automatic temperature detection at discontinuous processes

Scope of delivery

Scope of delivery Pyrometer CellaTemp PX
Connection cable VK 02/L AF 1 (5 m)
Video cable VK 02/F (5 m) for model with built-in camera
Operating manual (short)

Pyrometer CellaTemp PX 35

Emissivity calculator

The correct emissivity to be set on the pyrometer is calculated from the measured value displayed on the pyrometer, the true object temperature, the emissivity preset at the pyrometer and the ambient temperature (required for some instrument types).
The value displayed by the pyrometer is calculated from the true object temperature, the emissivity of the measurement object, the emissivity set on the pyrometer and the ambient temperature (required for some instrument types).
Pyrometer
Quotient
  • Two-color mode
  • One-color 1
  • One-color 2
Preset emissivity
Emissivity ratio to be set
Ambient temperature
Object temperature
Value measured by the pyrometer
Pyrometer
Quotient
  • Two-color mode
  • One-color 1
  • One-color 2
Preset emissivity
Value measured by the pyrometer
Ambient temperature
Object temperature
Emissivity ratio to be set

Pyrometer CellaTemp PX 35

Downloads

Brochure CellaTemp PX
us
Brochure Flyer IO-Link
us
Brochure Supplementary lenses
us
Manual CellaTemp PX 1x 2x 3x
us
Quick guide CellaTemp PX 1x 2x 3x
us
Declaration of conformity Declaration of Conformity PXxx
us
UKCA Declaration of Conformity PXxx
us
EAC Deklaration PX
us

Pyrometer CellaTemp PX 35

Accessories

Pyrometer CellaTemp PX 35

IO-Link IODD

Type Datei Dateigröße
IODD PX35AF1-2-3-4-5-L_20190503.zip 1740 KB Download
IODD PX35AF1-2-3-4-5-C_20190109.zip 1486 KB Download
IODD PX35AF1-2-3-4-5_20190109.zip 1481 KB Download

Pyrometer CellaTemp PX 35

IO-Link Manufacturer declaration

Type Datei Dateigröße
MC PX 35 AF 1 2 3 4 5_20190110_en.pdf 366 KB Download
MC PX 35 AF 1 2 3 4 5 C_20190110_en.pdf 366 KB Download
MC PX 35 AF 1 2 3 4 5 L_20190111_en.pdf 364 KB Download

Pyrometer CellaTemp PX 35

Measurement field calculator

Pyrometer
  • PX 35 AF 1 (0,4 m - ∞)
  • PX 35 AF 2 (0,2 - 0,4 m)
  • PX 35 AF 3 (1,2 m - ∞)
  • PX 35 AF 4 (0,2 m - ∞)
  • PX 35 AF 5 (0,6 m - ∞)
PX 35 AF 1 (0,4 m - ∞)
Supplementary lens
  • none
  • PZ 20/0-50 (0,036 - 0,041 m)
  • PZ 20/O-63 (0,045 - 0,054 m)
  • PZ 20/O-75 (0,052 - 0,063 m)
  • PZ 20/O-120 (0,084 - 0,112 m)
none
Focal range
mm
Length of the graph
mm
Measuring distance (mm)03264961281601922242562883203523841.90 mm
Measuring distanceMeasuring field diameter
0.00 mm18.00 mm
16.00 mm17.36 mm
32.00 mm16.71 mm
48.00 mm16.07 mm
64.00 mm15.42 mm
80.00 mm14.78 mm
96.00 mm14.14 mm
112.00 mm13.49 mm
128.00 mm12.85 mm
144.00 mm12.21 mm
160.00 mm11.56 mm
176.00 mm10.92 mm
192.00 mm10.27 mm
208.00 mm9.63 mm
224.00 mm8.99 mm
240.00 mm8.34 mm
256.00 mm7.70 mm
272.00 mm7.06 mm
288.00 mm6.41 mm
304.00 mm5.77 mm
320.00 mm5.12 mm
336.00 mm4.48 mm
352.00 mm3.84 mm
368.00 mm3.19 mm
384.00 mm2.55 mm
400.00 mm1.90 mm
Pyrometer LLC – Pyrometer Instrument Company

Attn: Service Department
70 Weber Avenue
Ewing, NJ 08638 USA
Telephone: 609-443-5522

Warranty Information | Privacy Policy | Shipping & Returns
 

Request a quote

 
       
back Checkout

Reference number:
INDICE 6 Login
© 2001-2024 – Internetagentur – Wrocklage Werbewerkstatt